The Ducati motorcycle company began as Societa Scientifica Radio Brevetti Ducati founded in 1926, by brothers Adriano, Bruno Cavalieri, and Marcello Ducati from Borgo Panigal Bologna, Italy.
Ducati began by manufacturing radio components, diversifying into motor-driven bicycles shortly after WWII.
A company called Societa Italiana per Applicazioni Tecniche Auto-Aviatorie (SIATA) began producing small single-cylinder engines designed to be mounted onto a bicycle frame. The engines were dubbed "Cucciolo," or "little puppy" for the unusual exhaust-note emanating from its short exhaust pipe.
At the end of WWII, businesses like Ducati and SIATA fell under the jurisdiction of the IRI (Institute for Industrial Reconstruction), a governmental agency that co-managed large industrial companies.
Ducati Singles (1950 to 1973)
With the success of the Cucciolo engine, Ducati decided to partner with SIATA to produce its first small-displacement motorcycle in 1950. The first Ducati was called the was 55M (65TL), and featured a 60cc pushrod engine that produced a top speed of 40 mph.
The Ducati 100 Gran Sport
The limited production 1954 100 Gran Sport was designed by Fabio Taglioni, had a 98cc single-cylinder engine with a OHC overhead-cam driven by a vertical shaft with conical gears, and a 10º forward tilt to the nearly vertical cylinder head. The Gran Sport's single-cylinder OHC engine design was the precursor for two decades of engine production at Ducati
1955 Ducati 100 Gran Sport
In 1953, 'Societa Scientifica Radio Brevetti Ducati' was broken into two separate companies: Ducati Elettronica SpA, and the motorcycle division of Ducati Meccanica SpA. Fabio Taglioni was elevated to chief designer of Ducati Meccanica in 1954, and his Gran Sport was upgraded to a 125cc double overhead cam (DOHC) engine in 1956.
100cc Gran Sport Engine
As the popularity and performance of Ducati motorcycles grew with Italian enthusiasts, they set out to position itself as a race-worthy marque.
The Ducati Desmo (Desmodromic) Engine
To develop higher horsepower race-capable engines with such small displacement, it was necessary to significantly increase the rpm range of their motors. The 125cc Gran Sport engine was capable of safely hitting the 11,500 rpm range without producing enough valve float to collide piston with valve.
The principle of mechanically 'forcing' the valve to close, and not relying totally on a valve-spring, was first conceived in the late 1800s, but was not put into practical use until the 1930s. This mechanical system became known as "desmodromics," which is Greek for: desmos 'controlled,' and dromos 'course.'
1959 Ducati 175cc Formula 3 Production Racer
Milan-based motorcycle company Mòndial toyed with the idea of a desmodromic engine in the early 1950s, but abandoned the idea. Ducati first developed their own version of a desmodromic, or "Desmo" system in 1956, using the design on their 125cc Grand Prix race bike. The 125cc Desmo was now theoretically capable of a maximum 14,000 to 15,000 rpm range; creating higher horespower.
1959 Ducati 200 Super Sport - Owner: Alan Chalk, California
The 125cc Ducati Desmo proved to be a race-worthy competitor to the MV Agusta which was dominating the 125cc class.
Intrest in Ducati from across the Atlantic had prompted two brothers, Joseph and Michael Berliner to open the Ducati franchise in the United States. The Berliner corporation had a great deal of influence in design direction ment for the American consumer.
Ducati 200cc Super Sport Engine
In the late 1950s, Ducati introduced the 125 Monza and Monza 'Super,' and Ducati was now trying to squeeze as much horsepower as possible out of their 125cc engine, with their retail competitors moving to higher displacement engines.
1962 Ducati 125 Sport
Fabio Taglioni steadily increased the reliability, displacement, and power of Ducati's single-cylinder engine using faster cams, high-compression pistons, and Dell'Orto SS racing carburetors, helping Ducati to win several Grand Prix championships over the next decade.
The Ducati 250cc Mach 3 Diana
Ducati moved into the 250cc displacement category in the early 1960s, with the introduction of the 'Ducati 250' and Mark 3 (Mach 3) 'Diana' Super Sport.
1965 Ducati Mark 3 Diana - Owner: Ian Berger, California
Moving up the displacement ladder, Ducati introduced its first 350cc production motorcycle in the mid 1960s, which was called the '350 Sebring.' By this point, US Ducati importer Berliner was pushing for the reluctant company to start producing larger displacement twins that could compete with Indian and Harley Davidson.
250cc Mark 3 Diana OHC Engine
In 1967, the Italian government took over the day-to-day operations of Ducati through the holding company known as EFIM (Ente Partecipazioni e Finanziamento Industria Manifatturiera), which now controlled over 114 industrial companies within Italy.
By 1967, Ducati Meccanica SpA produced its first "production" desmodromic (Desmo) consumer model, the Mark 3D. The Ducati 450 cc motor was the company's largest displacement model to date. Unfortunately for Ducati, the non-Italian buying public was looking for 2-cylinder larger-displacement motorcycles, and Ducati would need to change with the times to survive.
The Ducati Apollo
By the mid 1960s the Berliner brothers helped to underwrite the development of Ducati's first multi-cylinder engine. The bike, having a launch date of late 1965, was to be named the Ducati 'Apollo,' featuring a 1256cc 90º V-four engine, with two valves per cylinder. With over 100 bhp, it would have been one of the most powerful motorcycles of the time.
Unfortunately for the the Berliner brothers, the Italian government's EFIM management nixed the project, however the development of the Apollo's engine did lead to the development of smaller displacement 90º V-Twin engines in 1970. Ducati's unusual positioning of the V-Twin lead to it being referred to as the "L-Twin."
Ducati Twins (1970 to Present) - V-Twin 750GT
In 1970, Ducati's first v-twin engines were designed primarily for use in Grand Prix racing. Working with Italjet founder Leopoldo Tartarini, Fabio Taglioni designed and built several 500cc V-Twin racing Ducatis.
The Ducati 750GT & 860GT
The first production v-twin was the Ducati 750GT, with bevel-gear driven two-valve cylinder heads, fibreglass gastank, and painted silver frame. The 750GT evolved over the next decade to be sold as the 750 Sport, 750SS, 860GT & GTS, 900SS and Mike Hailwood Replica.
1977 Ducati 860GT
Ducati engineers moved to a belt-driven double overhead camshaft (DOHC) system for their GP bikes in 1973. The belt-drive engines were distinguished by their a radial-finned forward cylinder head.
The Ducati 'Pantah 500'
Ducati's first use of the belt-driven cam in a production motorcycle came in 1980, with the 500cc "Pantah 500SL." The Pantah engine's belt-drive would be the precursor for all Ducati v-twin engines to come. The Pantah also featured the first use of the now signature "trellis frame," which incorporated the engine/transmission as a stress member, and swingarm pivot point.
The Pantah lasted for six years under the model names: 500SL, 600SL, 600TL, and the 650SL which was the last of the Pantah line in 1986.
Cagiva's Purchase of Ducati
In 1985, Ducati Meccanica SpA was purchased by Cagiva, who also purchased MV Agusta in 1987.
The Ducati 851 Desmoquattro
In late 1987, the Ducati 851 went into production with a desmodromic four-valve per cylinder engine, dubbed as the "Desmoquattro," or Quattrovalvole. The Ducati 851 with its fuel injected, and liquid cooled design was the precursor to the 888, 916 (designed by Massimo Tamburini), 996S, 996 Biposto, and 996SPS with Öhlins suspension.
Product history
The chief designer of most Ducati motorcycles in the 1950s was Fabio Taglioni (1920–2001). His designs ranged from the small single-cylinder machines that were successful in the Italian 'street races' to the large-capacity twins of the 1980s. Ducati introduced the Pantah in 1979; its engine was updated in the 1990s in the Ducati SuperSport (SS) series. All modern Ducati engines are derivatives of the Pantah, which uses a toothed belt to actuate the engine's valves. Taglioni used the Cavallino Rampante (identified with the Ferrari brand) on his Ducati motorbikes, Taglioni chose this emblem of courage and daring as a sign of respect and admiration for Francesco Baracca, a heroic World War I fighter pilot who died during an air raid in 1918.
1950s
Ducati Singles
1960s
Ducati Singles
See also: Ducati Apollo
This section requires expansion.
1970s
Ducati V-twin motorcycles
In 1973, Ducati commemorated its 1972 win at the Imola 200 with the production model green frame Ducati 750 SuperSport.
Ducati also targeted the offroad market with the two-stroke Regolarità 125, building 3,486 models from 1975 to 1979, but the bike was not successful.
In 1975, the company introduced the 860 GT, designed by noted car stylist Giorgio Giugiaro. Its angular lines were unique, but raised handlebars made for an uncomfortable seating position at high speeds and also caused steering issues
1980s
Main article: Ducati Desmoquattro motorcycles
Ducati's liquid-cooled multi-valve V-twins made from 1985 on are known as Desmoquattro ("desmodromic valve four "). These include the 851, 916 and 996, 999 and a few predecessors and derivatives.
1990s
In 1993, Miguel Angel Galuzzi introduced the Ducati Monster, a naked bike with exposed trellis and engine. Today the Monster accounts for almost half of the company's worldwide sales. The Monster has undergone the most changes of any motorcycle that Ducati has ever produced.
In 1993, Pierre Terblanche, Massimo Bordi and Claudio Domenicali designed the Ducati Supermono . A 550 cc single-cylinder lightweight "Catalog Racer". Only 67 were built between 1993 and 1997.
In 1994, the company introduced the Ducati 916 model designed by Massimo Tamburini,[21] a water-cooled version that allowed for higher output levels and a striking new bodywork that featured aggressive lines, an underseat exhaust, and a single-sided swingarm. Ducati has since ceased production of the 916, supplanting it (and its progeny, the 748, 996 and 998) with the 749 and 999.
2000s
In 2006, the retro-styled Ducati PaulSmart1000LE was released, which shares styling cues with the 1973 750 SuperSport (itself a production replica of Paul Smart's 1972 race winning 750 Imola Desmo), as one of a SportClassic series representing the 750 GT, 750 Sport, and 750 SuperSport Ducati motorcycles.
Monster: 620, 695, 750, 900, S2R, S4R
ST2, ST3, ST4
Paul Smart 1000LE and SportClassic variants[22]
SuperSport 750, 900, 1000
748, 749
996, 998, 999, 1098, 1098S, 1098R, 1198
Desmosedici RR
Current lineup
Ducati Hypermotard
Ducati Desmosedici RR
Ducati 1098 S Tricolore
Monster
696
796
1100 Evo
Multistrada
1200
1200 S
Diavel[27]
Diavel, Cromo, Carbon, and AMG
Superbike
848 Evo
1199 Panigale
Hypermotard
796
1100 Evo
1100 Evo SP
Streetfighter
Streetfighter
Streetfighter S
[edit]Engines
Desmodue: Desmodromic two-valve air-cooled, 40° included valve angle, (800SS, Multistrada 620, Monster 620 695 696 803 992)
Desmodue Double Spark: Desmo two-valve, air-cooled, 40° included valve angle, (1000DS, Multistrada 1000, 1000S, Monster S2R 1000, SportClassic GT 1000, Sport 1000, 1000S, Hypermotard 1100, 1100S)
Desmotre Double Spark: Desmo three-valve, liquid-cooled, 40° included valve angle, (ST3)
Desmoquattro Testastretta: Desmo four-valve, liquid-cooled, 25° included valve angle, (999, 749, Monster S4R, S4RS)
Testastretta Evoluzione: Desmo four-valve, liquid-cooled, 25° included valve angle, (848, 1098, 1198)
Superquadro: Desmo four-valve, liquid cooled (1199)
Article By
Summary  |
| Timeline : The Ducati motorcycle company |
 |
| Timeline : The Ducati motorcycle company |
At the end of WWII, businesses like Ducati and SIATA fell under the jurisdiction of the IRI (Institute for Industrial Reconstruction), a governmental agency that co-managed large industrial companies.
 |
| Timeline : The Ducati motorcycle company |
With the success of the Cucciolo engine, Ducati decided to partner with SIATA to produce its first small-displacement motorcycle in 1950. The first Ducati was called the was 55M (65TL), and featured a 60cc pushrod engine that produced a top speed of 40 mph.
 |
| Timeline : The Ducati motorcycle company |
The limited production 1954 100 Gran Sport was designed by Fabio Taglioni, had a 98cc single-cylinder engine with a OHC overhead-cam driven by a vertical shaft with conical gears, and a 10º forward tilt to the nearly vertical cylinder head. The Gran Sport's single-cylinder OHC engine design was the precursor for two decades of engine production at Ducati
 |
| Timeline : The Ducati motorcycle company |
In 1953, 'Societa Scientifica Radio Brevetti Ducati' was broken into two separate companies: Ducati Elettronica SpA, and the motorcycle division of Ducati Meccanica SpA. Fabio Taglioni was elevated to chief designer of Ducati Meccanica in 1954, and his Gran Sport was upgraded to a 125cc double overhead cam (DOHC) engine in 1956.
 |
| Timeline : The Ducati motorcycle company |
As the popularity and performance of Ducati motorcycles grew with Italian enthusiasts, they set out to position itself as a race-worthy marque.
The Ducati Desmo (Desmodromic) Engine
To develop higher horsepower race-capable engines with such small displacement, it was necessary to significantly increase the rpm range of their motors. The 125cc Gran Sport engine was capable of safely hitting the 11,500 rpm range without producing enough valve float to collide piston with valve.
The principle of mechanically 'forcing' the valve to close, and not relying totally on a valve-spring, was first conceived in the late 1800s, but was not put into practical use until the 1930s. This mechanical system became known as "desmodromics," which is Greek for: desmos 'controlled,' and dromos 'course.'
 |
| Timeline : The Ducati motorcycle company |
Milan-based motorcycle company Mòndial toyed with the idea of a desmodromic engine in the early 1950s, but abandoned the idea. Ducati first developed their own version of a desmodromic, or "Desmo" system in 1956, using the design on their 125cc Grand Prix race bike. The 125cc Desmo was now theoretically capable of a maximum 14,000 to 15,000 rpm range; creating higher horespower.
 |
| Timeline : The Ducati motorcycle company |
The 125cc Ducati Desmo proved to be a race-worthy competitor to the MV Agusta which was dominating the 125cc class.
Intrest in Ducati from across the Atlantic had prompted two brothers, Joseph and Michael Berliner to open the Ducati franchise in the United States. The Berliner corporation had a great deal of influence in design direction ment for the American consumer.
 |
| Timeline : The Ducati motorcycle company |
In the late 1950s, Ducati introduced the 125 Monza and Monza 'Super,' and Ducati was now trying to squeeze as much horsepower as possible out of their 125cc engine, with their retail competitors moving to higher displacement engines.
 |
| Timeline : The Ducati motorcycle company |
Fabio Taglioni steadily increased the reliability, displacement, and power of Ducati's single-cylinder engine using faster cams, high-compression pistons, and Dell'Orto SS racing carburetors, helping Ducati to win several Grand Prix championships over the next decade.
 |
| Timeline : The Ducati motorcycle company |
Ducati moved into the 250cc displacement category in the early 1960s, with the introduction of the 'Ducati 250' and Mark 3 (Mach 3) 'Diana' Super Sport.
1965 Ducati Mark 3 Diana - Owner: Ian Berger, California
Moving up the displacement ladder, Ducati introduced its first 350cc production motorcycle in the mid 1960s, which was called the '350 Sebring.' By this point, US Ducati importer Berliner was pushing for the reluctant company to start producing larger displacement twins that could compete with Indian and Harley Davidson.
250cc Mark 3 Diana OHC Engine
In 1967, the Italian government took over the day-to-day operations of Ducati through the holding company known as EFIM (Ente Partecipazioni e Finanziamento Industria Manifatturiera), which now controlled over 114 industrial companies within Italy.
By 1967, Ducati Meccanica SpA produced its first "production" desmodromic (Desmo) consumer model, the Mark 3D. The Ducati 450 cc motor was the company's largest displacement model to date. Unfortunately for Ducati, the non-Italian buying public was looking for 2-cylinder larger-displacement motorcycles, and Ducati would need to change with the times to survive.
The Ducati Apollo
By the mid 1960s the Berliner brothers helped to underwrite the development of Ducati's first multi-cylinder engine. The bike, having a launch date of late 1965, was to be named the Ducati 'Apollo,' featuring a 1256cc 90º V-four engine, with two valves per cylinder. With over 100 bhp, it would have been one of the most powerful motorcycles of the time.
Unfortunately for the the Berliner brothers, the Italian government's EFIM management nixed the project, however the development of the Apollo's engine did lead to the development of smaller displacement 90º V-Twin engines in 1970. Ducati's unusual positioning of the V-Twin lead to it being referred to as the "L-Twin."
Ducati Twins (1970 to Present) - V-Twin 750GT
In 1970, Ducati's first v-twin engines were designed primarily for use in Grand Prix racing. Working with Italjet founder Leopoldo Tartarini, Fabio Taglioni designed and built several 500cc V-Twin racing Ducatis.
The Ducati 750GT & 860GT
The first production v-twin was the Ducati 750GT, with bevel-gear driven two-valve cylinder heads, fibreglass gastank, and painted silver frame. The 750GT evolved over the next decade to be sold as the 750 Sport, 750SS, 860GT & GTS, 900SS and Mike Hailwood Replica.
 |
| Timeline : The Ducati motorcycle company |
Ducati engineers moved to a belt-driven double overhead camshaft (DOHC) system for their GP bikes in 1973. The belt-drive engines were distinguished by their a radial-finned forward cylinder head.
The Ducati 'Pantah 500'
Ducati's first use of the belt-driven cam in a production motorcycle came in 1980, with the 500cc "Pantah 500SL." The Pantah engine's belt-drive would be the precursor for all Ducati v-twin engines to come. The Pantah also featured the first use of the now signature "trellis frame," which incorporated the engine/transmission as a stress member, and swingarm pivot point.
The Pantah lasted for six years under the model names: 500SL, 600SL, 600TL, and the 650SL which was the last of the Pantah line in 1986.
Cagiva's Purchase of Ducati
In 1985, Ducati Meccanica SpA was purchased by Cagiva, who also purchased MV Agusta in 1987.
The Ducati 851 Desmoquattro
In late 1987, the Ducati 851 went into production with a desmodromic four-valve per cylinder engine, dubbed as the "Desmoquattro," or Quattrovalvole. The Ducati 851 with its fuel injected, and liquid cooled design was the precursor to the 888, 916 (designed by Massimo Tamburini), 996S, 996 Biposto, and 996SPS with Öhlins suspension.
Product history
 |
| Timeline : The Ducati motorcycle company |
1950s
Ducati Singles
1960s
Ducati Singles
See also: Ducati Apollo
This section requires expansion.
1970s
Ducati V-twin motorcycles
In 1973, Ducati commemorated its 1972 win at the Imola 200 with the production model green frame Ducati 750 SuperSport.
Ducati also targeted the offroad market with the two-stroke Regolarità 125, building 3,486 models from 1975 to 1979, but the bike was not successful.
In 1975, the company introduced the 860 GT, designed by noted car stylist Giorgio Giugiaro. Its angular lines were unique, but raised handlebars made for an uncomfortable seating position at high speeds and also caused steering issues
1980s
Main article: Ducati Desmoquattro motorcycles
Ducati's liquid-cooled multi-valve V-twins made from 1985 on are known as Desmoquattro ("desmodromic valve four "). These include the 851, 916 and 996, 999 and a few predecessors and derivatives.
1990s
In 1993, Miguel Angel Galuzzi introduced the Ducati Monster, a naked bike with exposed trellis and engine. Today the Monster accounts for almost half of the company's worldwide sales. The Monster has undergone the most changes of any motorcycle that Ducati has ever produced.
In 1993, Pierre Terblanche, Massimo Bordi and Claudio Domenicali designed the Ducati Supermono . A 550 cc single-cylinder lightweight "Catalog Racer". Only 67 were built between 1993 and 1997.
In 1994, the company introduced the Ducati 916 model designed by Massimo Tamburini,[21] a water-cooled version that allowed for higher output levels and a striking new bodywork that featured aggressive lines, an underseat exhaust, and a single-sided swingarm. Ducati has since ceased production of the 916, supplanting it (and its progeny, the 748, 996 and 998) with the 749 and 999.
2000s
In 2006, the retro-styled Ducati PaulSmart1000LE was released, which shares styling cues with the 1973 750 SuperSport (itself a production replica of Paul Smart's 1972 race winning 750 Imola Desmo), as one of a SportClassic series representing the 750 GT, 750 Sport, and 750 SuperSport Ducati motorcycles.
Monster: 620, 695, 750, 900, S2R, S4R
ST2, ST3, ST4
Paul Smart 1000LE and SportClassic variants[22]
SuperSport 750, 900, 1000
748, 749
996, 998, 999, 1098, 1098S, 1098R, 1198
Desmosedici RR
Current lineup
Ducati Hypermotard
Ducati Desmosedici RR
Ducati 1098 S Tricolore
Monster
696
796
1100 Evo
Multistrada
1200
1200 S
Diavel[27]
Diavel, Cromo, Carbon, and AMG
Superbike
848 Evo
1199 Panigale
Hypermotard
796
1100 Evo
1100 Evo SP
Streetfighter
Streetfighter
Streetfighter S
[edit]Engines
Desmodue: Desmodromic two-valve air-cooled, 40° included valve angle, (800SS, Multistrada 620, Monster 620 695 696 803 992)
Desmodue Double Spark: Desmo two-valve, air-cooled, 40° included valve angle, (1000DS, Multistrada 1000, 1000S, Monster S2R 1000, SportClassic GT 1000, Sport 1000, 1000S, Hypermotard 1100, 1100S)
Desmotre Double Spark: Desmo three-valve, liquid-cooled, 40° included valve angle, (ST3)
Desmoquattro Testastretta: Desmo four-valve, liquid-cooled, 25° included valve angle, (999, 749, Monster S4R, S4RS)
Testastretta Evoluzione: Desmo four-valve, liquid-cooled, 25° included valve angle, (848, 1098, 1198)
Superquadro: Desmo four-valve, liquid cooled (1199)
Article By
Related articles
